RadioCodeNow.com
2003-2009

Radio Code Toyota Avensis II

Toyota consistently chose Fujitsu Ten as the audio system supplier for the Avensis II — a Japanese manufacturer that also supplied other Toyota models. This has a practical consequence: the radios in the Avensis II share the WEL serial number system with a large part of the Toyota range from the same period. Once you know the procedure for one Toyota Fujitsu Ten radio, that knowledge applies broadly across multiple models.

Summary

Toyota logo
Brand
Toyota
Generation
II (T250)
Production years
2003-2009
Standard radio
Fujitsu Ten basis radio
Fujitsu Ten
Radio option 2
Fujitsu Ten met navigatie
Fujitsu Ten

Toyota consistently chose Fujitsu Ten as the audio system supplier for the Avensis II — a Japanese manufacturer that also supplied other Toyota models. This has a practical consequence: the radios in the Avensis II share the WEL serial number system with a large part of the Toyota range from the same period. Once you know the procedure for one Toyota Fujitsu Ten radio, that knowledge applies broadly across multiple models.

The audio system in the Avensis II

The Toyota Avensis second generation (internally T250) was produced from 2003 to 2009 and offered a Fujitsu Ten radio for the European market:

Fujitsu Ten base radio — a single-DIN unit with CD player, AM/FM, and a compact display. This system is fitted to virtually all Avensis IIs without factory navigation. After a power interruption, the display will ask for a 4-digit security code.

Fujitsu Ten with navigation — a navigation variant available on higher trim levels. Navigation via CD-ROM maps. This system also has a serial number on the sticker and uses a conventional code.

In most Avensis IIs sold in Europe, the base DIN radio is fitted. If you are unsure which variant you have, check whether there is a separate navigation screen in the dashboard or whether the navigation is integrated into the radio unit itself.

The WEL serial number

Fujitsu Ten uses its own serial number series for Toyota radios. On many variants the serial number begins with WEL followed by alphanumeric characters, or it may be an alphanumeric combination without a fixed prefix depending on the production year.

The serial number is on a sticker on the side or rear of the radio — visible once you have removed the unit from the centre console. Note down the full sequence, including letters and any hyphens, exactly as shown on the sticker.

Removing the radio from the Avensis II

The Avensis II has a standard DIN radio aperture in the centre console, although the exact removal method varies slightly depending on the trim level:

What you will need

  • Plastic trim removal tool (pry tool)
  • DIN keys or a screwdriver, as required

Procedure

1
Turn the ignition off.
2
Carefully remove the plastic surround around the radio using the trim tool. Start at one corner and work around the edge.
3
If screws are visible on the sides or at the top or bottom of the radio aperture, remove them.
4
Insert DIN keys into the extraction slots if present, or gently pull the radio forwards after removing the screws.
5
Disconnect the wiring connector and aerial cable from the rear of the radio. The serial number sticker is on the side or rear of the unit. Note it down in full.

Entering the code on the Fujitsu Ten radio

The exact entry procedure can vary slightly between model years and trim levels of the Avensis II. The most common method is as follows:

1
Turn the ignition key to position 1 (accessories on, engine off).
2
The radio will display a code entry screen or prompt you for input via the display.
3
Use the preset buttons or the tuning knob to set each digit of the code. Each press advances the active digit by one.
4
Set each of the four digits on the display.
5
Confirm with the OK button or an equivalent confirmation button. On some variants of the Fujitsu Ten in the Avensis II, you use the tuning knob to scroll through digits and the preset buttons to select or confirm. Consult the original handbook if the procedure above does not work immediately.

Lockout after incorrect attempts

If you enter an incorrect code too many times, the Fujitsu Ten radio will temporarily block further attempts.

1
Leave the ignition key at position 1 — keep the radio on.
2
Wait 60 to 90 minutes without disconnecting the battery or switching the ignition off.
3
After the waiting period, the code entry prompt will reappear. If you are certain you have the correct code, only enter it again once the waiting period has elapsed in full.

Obtaining the code from Toyota

Toyota recorded the radio code in its system at the time of original sale. Options for retrieving the code include:

  • Documentation: Some Avensis IIs were supplied with a code card in the vehicle paperwork.
  • Toyota dealer: An authorised Toyota dealer can look up the code with proof of ownership.
  • Serial number lookup: Via a code calculation service using the WEL serial number from the unit.

Retrieving your radio code for the Toyota Avensis II

With the serial number from your Fujitsu Ten radio, you can request the corresponding code directly online. You will receive the code within a few minutes by email.

Order your Toyota radio code via RadioCodeOpvragen.nl →

Frequently asked questions

Yes. The Avensis II is fitted with a Fujitsu Ten radio with a 4-digit security code. The serial number begins with WEL (or is an alphanumeric combination on the sticker) and is required to retrieve the code.
WEL refers to the serial number series that Fujitsu Ten uses for Toyota radios. The serial number is on a sticker on the side or rear of the radio, visible once you remove it. On some variants it may also be accessible via the display itself.
The Avensis II has a DIN radio aperture. Remove the plastic surround around the radio, unscrew the radio or use DIN keys depending on the trim level, and pull the radio forwards. The serial number sticker is on the side or rear.
Turn the ignition to position 1. The display will prompt you for the code. Use the preset buttons or the tuning knob to set each digit. Confirm with the OK button or a combination of buttons depending on your model. Consult the handbook for your specific variant.
Most likely not. The Fujitsu Ten radio enters security mode after a power loss. Turn the ignition on and wait a moment — the display will prompt you for the code after a short while. If there is no response, check the fuses.

Need a Toyota radio code?

Safe and fast via RadioCodeLookup.com — all you need is the serial number.

Order radio code

Laatst bijgewerkt: 2026-04-10